TY  - JOUR
  - Borah, D.; Shaw, M. T.; Holmes, J. D.; Morris, M. A.
  - 2013
  - April
  - Acs Applied Materials ; Interfaces
  - Sub-10 nm feature size PS-b-PDMS block copolymer structures fabricated by a microwave assisted solvothermal process
  - Published
  - Altmetric: 1 ()
  - 5
  - 6
  - 2004
  - 2012
  - Block copolymer (BCP) microphase separation at surfaces might enable the generation of substrate features in a scalable, manufacturable, bottom-up fashion provided that pattern structure, orientation, alignment can be strictly controlled. A further requirement is that self-assembly takes place within periods of the order of minutes so that continuous manufacturing processes do not require lengthy pretreatments and sample storage leading to contamination and large facility costs. We report here microwave-assisted solvothermal (in toluene environments) self-assembly and directed self-assembly of a very low molecular weight cylinder-forming polystyrene-block-polydimethylsiloxane (PS-b-PDMS) BCP on planar and patterned silicon nitride (Si3N4) substrates. Good pattern ordering was achieved in the order of minutes. Factors affecting BCP self-assembly,notably anneal time and temperature were studied and seen to have significant effects. Graphoepitaxy to direct self-assembly in the BCP yielded promising results producing BCP patterns with long-range translational alignment commensurate with the pitch period of the topographic patterns. This rapid BCP ordering method is consistent with the standard thermal/solvent anneal processes.
  - http://pubs.acs.org/journal/aamick
  - 10.1021/am302830w
DA  - 2013/04
ER  - 

@article{V206180009,
   = {Borah, D. and  Shaw, M. T. and  Holmes, J. D. and  Morris, M. A.},
   = {2013},
   = {April},
   = {Acs Applied Materials ; Interfaces},
   = {Sub-10 nm feature size PS-b-PDMS block copolymer structures fabricated by a microwave assisted solvothermal process},
   = {Published},
   = {Altmetric: 1 ()},
   = {5},
   = {6},
  pages = {2004--2012},
   = {{Block copolymer (BCP) microphase separation at surfaces might enable the generation of substrate features in a scalable, manufacturable, bottom-up fashion provided that pattern structure, orientation, alignment can be strictly controlled. A further requirement is that self-assembly takes place within periods of the order of minutes so that continuous manufacturing processes do not require lengthy pretreatments and sample storage leading to contamination and large facility costs. We report here microwave-assisted solvothermal (in toluene environments) self-assembly and directed self-assembly of a very low molecular weight cylinder-forming polystyrene-block-polydimethylsiloxane (PS-b-PDMS) BCP on planar and patterned silicon nitride (Si3N4) substrates. Good pattern ordering was achieved in the order of minutes. Factors affecting BCP self-assembly,notably anneal time and temperature were studied and seen to have significant effects. Graphoepitaxy to direct self-assembly in the BCP yielded promising results producing BCP patterns with long-range translational alignment commensurate with the pitch period of the topographic patterns. This rapid BCP ordering method is consistent with the standard thermal/solvent anneal processes.}},
   = {http://pubs.acs.org/journal/aamick},
   = {10.1021/am302830w},
  source = {IRIS}
}