Supercritical-fluid synthesis of FeF2 and CoF2 Li-ion conversion materials

Typeset version

 

TY  - JOUR
  - Armstrong, M. J.; Paneerselvam, A.; O’Regan, C.; Morris, M. A.; Holmes, J. D.
  - 2013
  - August
  - Journal of Materials Chemistry A
  - Supercritical-fluid synthesis of FeF2 and CoF2 Li-ion conversion materials
  - Published
  - ()
  - 1
  - 36
  - 10667
  - 10676
  - The synthesis of the Li-ion conversion candidates, FeF2 and CoF2, obtained from the single source organometallic precursors [Fe(tta)3] (tta =C8H4F3O2S), and [Co(hfac)2$2H2O] (hfac =C5H1F6O2), respectively, via a novel supercritical fluid (SCF) method is presented. The nature of the synthesis led to highly-crystalline FeF2 and CoF2 powders requiring no additional thermal treatment. The as-obtained powders were investigated for use as potential positive Li-ion conversion electrodes by means of chronopotentiometric measurements. The FeF2 cells displayed high initial capacities following electrochemical conversion (up to 1100 mA h g-1 at a potential of 1.0 V vs. Li/Li+), with appreciable cyclic behaviour over 25 discharge–charge cycles. The deposition of a 5 nm layer of amorphous carbon onto the surface of the active material following SCF treatment, likely facilitated adequate electron transport through an otherwise poorly conducting FeF2 phase. Similarly, CoF2 cells displayed high initial capacities (up to 650 mA h g-1 at a potential of 1.2 V vs. Li/Li+), although significant capacity fading ensued in the subsequent cycles. Ex situ XRD measurements confirmed a poor reversibility in the conversion sequence for CoF2, with a complete loss of CoF2 crystallinity and the sole presence of a crystalline LiF phase following charging
  - Cambridge, UK
  - na
  - na
  - http://pubs.rsc.org/en/journals/journalissues/ta#!recentarticles;all
  - 10.1039/c3ta12436c
DA  - 2013/08
ER  - 
@article{V226441731,
   = {Armstrong, M. J. and  Paneerselvam, A. and  O’Regan, C. and  Morris, M. A. and  Holmes, J. D.},
   = {2013},
   = {August},
   = {Journal of Materials Chemistry A},
   = {Supercritical-fluid synthesis of FeF2 and CoF2 Li-ion conversion materials},
   = {Published},
   = {()},
   = {1},
   = {36},
  pages = {10667--10676},
   = {{The synthesis of the Li-ion conversion candidates, FeF2 and CoF2, obtained from the single source organometallic precursors [Fe(tta)3] (tta =C8H4F3O2S), and [Co(hfac)2$2H2O] (hfac =C5H1F6O2), respectively, via a novel supercritical fluid (SCF) method is presented. The nature of the synthesis led to highly-crystalline FeF2 and CoF2 powders requiring no additional thermal treatment. The as-obtained powders were investigated for use as potential positive Li-ion conversion electrodes by means of chronopotentiometric measurements. The FeF2 cells displayed high initial capacities following electrochemical conversion (up to 1100 mA h g-1 at a potential of 1.0 V vs. Li/Li+), with appreciable cyclic behaviour over 25 discharge–charge cycles. The deposition of a 5 nm layer of amorphous carbon onto the surface of the active material following SCF treatment, likely facilitated adequate electron transport through an otherwise poorly conducting FeF2 phase. Similarly, CoF2 cells displayed high initial capacities (up to 650 mA h g-1 at a potential of 1.2 V vs. Li/Li+), although significant capacity fading ensued in the subsequent cycles. Ex situ XRD measurements confirmed a poor reversibility in the conversion sequence for CoF2, with a complete loss of CoF2 crystallinity and the sole presence of a crystalline LiF phase following charging}},
   = {Cambridge, UK},
  issn = {na},
   = {na},
   = {http://pubs.rsc.org/en/journals/journalissues/ta#!recentarticles;all},
   = {10.1039/c3ta12436c},
  source = {IRIS}
}
AUTHORSArmstrong, M. J.; Paneerselvam, A.; O’Regan, C.; Morris, M. A.; Holmes, J. D.
YEAR2013
MONTHAugust
JOURNAL_CODEJournal of Materials Chemistry A
TITLESupercritical-fluid synthesis of FeF2 and CoF2 Li-ion conversion materials
STATUSPublished
TIMES_CITED()
SEARCH_KEYWORD
VOLUME1
ISSUE36
START_PAGE10667
END_PAGE10676
ABSTRACTThe synthesis of the Li-ion conversion candidates, FeF2 and CoF2, obtained from the single source organometallic precursors [Fe(tta)3] (tta =C8H4F3O2S), and [Co(hfac)2$2H2O] (hfac =C5H1F6O2), respectively, via a novel supercritical fluid (SCF) method is presented. The nature of the synthesis led to highly-crystalline FeF2 and CoF2 powders requiring no additional thermal treatment. The as-obtained powders were investigated for use as potential positive Li-ion conversion electrodes by means of chronopotentiometric measurements. The FeF2 cells displayed high initial capacities following electrochemical conversion (up to 1100 mA h g-1 at a potential of 1.0 V vs. Li/Li+), with appreciable cyclic behaviour over 25 discharge–charge cycles. The deposition of a 5 nm layer of amorphous carbon onto the surface of the active material following SCF treatment, likely facilitated adequate electron transport through an otherwise poorly conducting FeF2 phase. Similarly, CoF2 cells displayed high initial capacities (up to 650 mA h g-1 at a potential of 1.2 V vs. Li/Li+), although significant capacity fading ensued in the subsequent cycles. Ex situ XRD measurements confirmed a poor reversibility in the conversion sequence for CoF2, with a complete loss of CoF2 crystallinity and the sole presence of a crystalline LiF phase following charging
PUBLISHER_LOCATIONCambridge, UK
ISBN_ISSNna
EDITIONna
URLhttp://pubs.rsc.org/en/journals/journalissues/ta#!recentarticles;all
DOI_LINK10.1039/c3ta12436c
FUNDING_BODY
GRANT_DETAILS