A Novel RCS based CRFID Tag Design

Research output: Chapter in Book/Report/Conference proceedingsChapterpeer-review

Abstract

In this paper, a Chipless RFID tag design based on Radar Cross Section (RCS) operating principle is proposed. The tag is implemented using a series of circular ring resonators to enable tag identification. The resonators are simulated and then fabricated on an FR4 substrate. A calibration technique using a ring resonator to improve the detection of 8-bit data is proposed and demonstrated. The fabricated tag is measured at a distance of 160 mm using the monostatic RCS method. The measurement results verify the simulation results and show accurate detection of the encoded information.

Original languageEnglish
Title of host publication2022 16th European Conference on Antennas and Propagation, EuCAP 2022
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9788831299046
Publication statusPublished - 2022
Event16th European Conference on Antennas and Propagation, EuCAP 2022 - Madrid, Spain
Duration: 27 Mar 20221 Apr 2022

Publication series

Name2022 16th European Conference on Antennas and Propagation, EuCAP 2022

Conference

Conference16th European Conference on Antennas and Propagation, EuCAP 2022
Country/TerritorySpain
CityMadrid
Period27/03/221/04/22

Keywords

  • antennas
  • chipless RFID
  • circular ring resonators
  • measurements
  • radar cross section

Fingerprint

Dive into the research topics of 'A Novel RCS based CRFID Tag Design'. Together they form a unique fingerprint.

Cite this