An Experimental Study on the Dilute Phase Pneumatic Conveying of Fat-Filled Milk Powders: Particle Breakage

Powder breakage during pneumatic conveying negatively affects the properties of dairy products and causes increased dusting, reduced wettability, and decreased product performance. In particular, particle breakage is a serious issue for fat-filled milk powder (FFMP) which, if it breaks, releases fat that causes odours and leads to sticky blocked pipes. In this work, a conveying rig (dilute phase, positive pressure) with 50 mm diameter food grade stainless steel pipes (1.5 m high and 5 m conveying distance with three 90° bends, two in the vertical plane and one in the horizontal plane) was built as the test system. The effects of operating conditions (conveying air velocity and solid loading rate) on the attrition of FFMP in a dilute phase conveying system were experimentally studied. Four quality characteristics were measured before and after conveying: bulk density, particle size distribution, wettability, and solubility, to access the influence of particle breakage. Conveying air speed shows a significant impact on powder breakage. As air speed increased, more breakage occurred, and the volume mean diameter D[4,3] decreased by around 50%, using the largest conveying air speed of 38 m/s. Bulk density increased accordingly whereas wettability decreased with an increase in air speed, resulting from the higher breakage rate. On other hand, improving the solid loading rate can further reduce the breakage level, but the positive effect is not as good as decreasing air speed.