TY - GEN
T1 - An ISM-Band RFID Module for Simultaneous Wireless Information and Power Transfer with High Gain Antenna in Multi-Layer Configuration
AU - Chatzichristodoulou, David
AU - Paolini, Giacomo
AU - Vryonides, Photos
AU - Psychogiou, Dimitra
AU - Masotti, Diego
AU - Costanzo, Alessandra
AU - Nikolaou, Symeon
N1 - Publisher Copyright:
© 2023 European Association for Antennas and Propagation.
PY - 2023
Y1 - 2023
N2 - This paper presents an implementation of an ISM RFID module capable of simultaneous wireless information and power transfer, that is implemented in a three-layer configuration. The top two layers of the RFID module are used for the low profile, high gain (8 dBi), circular polarization antenna implementation. The proposed antenna consists of four radiating L-shaped patches on the top layer, which are fed from a circular power divider. The energy harvesting (EH) system and the communication module are implemented on the bottom third layer. A four-port coupler is used to direct 85-90% of the received power from the antenna to the EH system and the remaining to the communication module. TI CC2530 IC is used, and it is powered from the PMU of the EH system. With -13 dBm input power, at the coupler's port 3, the communication module can support TX/RX communication cycle lasting up to 3.5 ms.
AB - This paper presents an implementation of an ISM RFID module capable of simultaneous wireless information and power transfer, that is implemented in a three-layer configuration. The top two layers of the RFID module are used for the low profile, high gain (8 dBi), circular polarization antenna implementation. The proposed antenna consists of four radiating L-shaped patches on the top layer, which are fed from a circular power divider. The energy harvesting (EH) system and the communication module are implemented on the bottom third layer. A four-port coupler is used to direct 85-90% of the received power from the antenna to the EH system and the remaining to the communication module. TI CC2530 IC is used, and it is powered from the PMU of the EH system. With -13 dBm input power, at the coupler's port 3, the communication module can support TX/RX communication cycle lasting up to 3.5 ms.
KW - Coupler
KW - rectifier
KW - SoC
KW - SWIPT
KW - transceiver
UR - https://www.scopus.com/pages/publications/85162206429
U2 - 10.23919/EuCAP57121.2023.10133581
DO - 10.23919/EuCAP57121.2023.10133581
M3 - Conference proceeding
AN - SCOPUS:85162206429
T3 - 17th European Conference on Antennas and Propagation, EuCAP 2023
BT - 17th European Conference on Antennas and Propagation, EuCAP 2023
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 17th European Conference on Antennas and Propagation, EuCAP 2023
Y2 - 26 March 2023 through 31 March 2023
ER -