Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons

H. Ahmadian Baghbaderani; D. J. Cronin; P. McCloskey; S. Kulkarni; Z. Pavlovic; A. Masood; K. Ackland; P. Stamenov; C. O'Mathuna

doi:10.1109/INTMAG.2018.8508478

Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons

H. Ahmadian Baghbaderani
, D. J. Cronin
, P. McCloskey
, S. Kulkarni
, Z. Pavlovic
, A. Masood
, K. Ackland
, P. Stamenov
, C. O'Mathuna

Tyndall IPES (Integrated Power)

Research output: Chapter in Book/Report/Conference proceedings › Conference proceeding › peer-review

Abstract

Advances in power conversion technologies have highlighted the need for development of new class of magnetic components (inductors, transformers etc) with lower footprint and higher efficiency. Presently, the sizes of these magnetic components have been limited due to the use of low flux density ferrite as a core material. In this paper, the assembly and working of an amorphous ribbon transformer with low loss performance as a replacement for ferrite based ones were studied. The minimum amount of power loss of the material was measured as <750 kW/m³ at 100 kHz. The paper also shows the significant reduction in the footprint of the fabricated inductor.

Original language	English
Title of host publication	2018 IEEE International Magnetic Conference, INTERMAG 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781538664254
DOIs	https://doi.org/10.1109/INTMAG.2018.8508478
Publication status	Published - 24 Oct 2018
Event	2018 IEEE International Magnetic Conference, INTERMAG 2018 - Singapore, Singapore Duration: 23 Apr 2018 → 27 Apr 2018

Publication series

Name	2018 IEEE International Magnetic Conference, INTERMAG 2018

Conference

Conference	2018 IEEE International Magnetic Conference, INTERMAG 2018
Country/Territory	Singapore
City	Singapore
Period	23/04/18 → 27/04/18

Access to Document

10.1109/INTMAG.2018.8508478

Cite this

Ahmadian Baghbaderani, H., Cronin, D. J., McCloskey, P., Kulkarni, S., Pavlovic, Z., Masood, A., Ackland, K., Stamenov, P., & O'Mathuna, C. (2018). Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons. In 2018 IEEE International Magnetic Conference, INTERMAG 2018 Article 8508478 (2018 IEEE International Magnetic Conference, INTERMAG 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/INTMAG.2018.8508478

@inproceedings{fd2c22ece0df4c3ab06e8b5026762b8b,

title = "Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons",

abstract = "Advances in power conversion technologies have highlighted the need for development of new class of magnetic components (inductors, transformers etc) with lower footprint and higher efficiency. Presently, the sizes of these magnetic components have been limited due to the use of low flux density ferrite as a core material. In this paper, the assembly and working of an amorphous ribbon transformer with low loss performance as a replacement for ferrite based ones were studied. The minimum amount of power loss of the material was measured as <750 kW/m3 at 100 kHz. The paper also shows the significant reduction in the footprint of the fabricated inductor.",

author = "\{Ahmadian Baghbaderani\}, H. and Cronin, \{D. J.\} and P. McCloskey and S. Kulkarni and Z. Pavlovic and A. Masood and K. Ackland and P. Stamenov and C. O'Mathuna",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 2018 IEEE International Magnetic Conference, INTERMAG 2018 ; Conference date: 23-04-2018 Through 27-04-2018",

year = "2018",

month = oct,

day = "24",

doi = "10.1109/INTMAG.2018.8508478",

language = "English",

series = "2018 IEEE International Magnetic Conference, INTERMAG 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2018 IEEE International Magnetic Conference, INTERMAG 2018",

address = "United States",

}

Ahmadian Baghbaderani, H, Cronin, DJ, McCloskey, P, Kulkarni, S, Pavlovic, Z, Masood, A, Ackland, K, Stamenov, P & O'Mathuna, C 2018, Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons. in 2018 IEEE International Magnetic Conference, INTERMAG 2018., 8508478, 2018 IEEE International Magnetic Conference, INTERMAG 2018, Institute of Electrical and Electronics Engineers Inc., 2018 IEEE International Magnetic Conference, INTERMAG 2018, Singapore, Singapore, 23/04/18. https://doi.org/10.1109/INTMAG.2018.8508478

Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons. / Ahmadian Baghbaderani, H.; Cronin, D. J.; McCloskey, P. et al.
2018 IEEE International Magnetic Conference, INTERMAG 2018. Institute of Electrical and Electronics Engineers Inc., 2018. 8508478 (2018 IEEE International Magnetic Conference, INTERMAG 2018).

Research output: Chapter in Book/Report/Conference proceedings › Conference proceeding › peer-review

TY - GEN

T1 - Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons

AU - Ahmadian Baghbaderani, H.

AU - Cronin, D. J.

AU - McCloskey, P.

AU - Kulkarni, S.

AU - Pavlovic, Z.

AU - Masood, A.

AU - Ackland, K.

AU - Stamenov, P.

AU - O'Mathuna, C.

PY - 2018/10/24

Y1 - 2018/10/24

N2 - Advances in power conversion technologies have highlighted the need for development of new class of magnetic components (inductors, transformers etc) with lower footprint and higher efficiency. Presently, the sizes of these magnetic components have been limited due to the use of low flux density ferrite as a core material. In this paper, the assembly and working of an amorphous ribbon transformer with low loss performance as a replacement for ferrite based ones were studied. The minimum amount of power loss of the material was measured as <750 kW/m3 at 100 kHz. The paper also shows the significant reduction in the footprint of the fabricated inductor.

AB - Advances in power conversion technologies have highlighted the need for development of new class of magnetic components (inductors, transformers etc) with lower footprint and higher efficiency. Presently, the sizes of these magnetic components have been limited due to the use of low flux density ferrite as a core material. In this paper, the assembly and working of an amorphous ribbon transformer with low loss performance as a replacement for ferrite based ones were studied. The minimum amount of power loss of the material was measured as <750 kW/m3 at 100 kHz. The paper also shows the significant reduction in the footprint of the fabricated inductor.

UR - https://www.scopus.com/pages/publications/85066813078

U2 - 10.1109/INTMAG.2018.8508478

DO - 10.1109/INTMAG.2018.8508478

M3 - Conference proceeding

AN - SCOPUS:85066813078

T3 - 2018 IEEE International Magnetic Conference, INTERMAG 2018

BT - 2018 IEEE International Magnetic Conference, INTERMAG 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2018 IEEE International Magnetic Conference, INTERMAG 2018

Y2 - 23 April 2018 through 27 April 2018

ER -

Ahmadian Baghbaderani H, Cronin DJ, McCloskey P, Kulkarni S, Pavlovic Z, Masood A et al. Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons. In 2018 IEEE International Magnetic Conference, INTERMAG 2018. Institute of Electrical and Electronics Engineers Inc. 2018. 8508478. (2018 IEEE International Magnetic Conference, INTERMAG 2018). doi: 10.1109/INTMAG.2018.8508478

Fabrication and development of miniaturized efficient power converters using ultra-soft magnetic ribbons

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this