Integrated Quadruple Output Synchronous Buck Converter for E-Mobility Application

A nonisolated integrated multiple output synchronous buck converter is proposed in this article to cater the auxiliary power supply requirements of e-mobility. The converter provides independently controlled multiple outputs with reduced switch count as compared to conventional separate buck converters as well as conventional synchronous buck converter. The operating principle and working of the proposed converter are discussed in detail for better understanding. As the dynamic behavior of the converter is similar to the conventional buck converter, a simple controller is designed and implemented in this work. The converter is simulated in MATLAB-Simulink. A laboratory prototype of single input-quadruple output (SIQO) converter is developed and operated under closed loop condition to validate and demonstrate its advantages. The prototype is developed by designing two inductors on a single core for increased compactness and reduced cost of the converter. Each output of the converter can be independently controlled by varying the duty ratio of the related switch, thereby eliminating the effective cross regulation problem. The efficiency of the proposed SIQO converter is 93.6%, with four output ports, which is higher than its category of converters reported earlier. A significant improvement in the calculated efficiency is observed with the replacement of conventional switches and diodes of the converter by SiC switches (96.1%).