Skip to main navigation Skip to search Skip to main content

Investigation of a composite flow control technique for vertical axis wind turbine: A slotted blade integrated with the active flap control

  • Huahao Ou
  • , Weipao Miao
  • , Chun Li
  • , Qingsong Liu
  • , Qiang Zhang
  • , Hongjing Yu
  • , Zifei Xu
  • University of Shanghai for Science and Technology
  • University of Liverpool
  • Shanghai Institute of Non-carbon Energy Conversion and Utilization
  • Liverpool John Moores University

Research output: Contribution to journal › Article › peer-review

Abstract

Slotting is a commonly used passive flow control technique that can improve the aerodynamic performance of vertical axis wind turbines (VAWTs) under low tip speed ratio (TSR) conditions. However, conventional slotted blades often cause flow separation at medium-to-high TSRs, reducing overall efficiency. To address this, a composite control mechanism integrating a slot with a dynamically actuated flap is proposed. By lifting or retracting the flap, the slot state is adaptively adjusted, while the flap also suppresses flow separation. Two-dimensional simulations combined with orthogonal experimental design were used to determine optimal slot-flap (OSF) parameters. A flap control strategy was then developed, enabling dynamic actuation. Quasi three-dimensional simulations were performed to validate the aerodynamic performance of the OSF configuration. Results show that across the investigated TSR range (1.43 ∼ 3.29), the OSF-VAWT consistently outperforms baseline, conventional slotted, and flap-only models in power coefficient and torque output. Flow field analyses reveal that these improvements stem from three synergistic mechanisms: effective camber modification at stall onset, vortex fragmentation during deep stall, and wake stabilization via the history effect during recovery. This study demonstrates that the slot-flap mechanism effectively overcomes the limitations of traditional passive control methods and provides a potential design strategy for improving VAWT blade performance.

Original languageEnglish
Article number140536
JournalEnergy
Volume348
DOIs
Publication statusPublished - 1 Apr 2026
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Aerodynamic performance
  • Flow control
  • Orthogonal experimental design
  • Slot-flap
  • VAWT

Fingerprint

Dive into the research topics of 'Investigation of a composite flow control technique for vertical axis wind turbine: A slotted blade integrated with the active flap control'. Together they form a unique fingerprint.

Cite this