Power-factor-corrected single-stage inductive charger for electric vehicle batteries

Michael G. Egan; Dara L. O'Sullivan; John G. Hayes; Michael J. Willers; Christopher P. Henze

doi:10.1109/TIE.2007.892996

Power-factor-corrected single-stage inductive charger for electric vehicle batteries

Michael G. Egan
, Dara L. O'Sullivan
, John G. Hayes
, Michael J. Willers
, Christopher P. Henze

School of Biological, Earth and Environmental Sciences

Research output: Contribution to journal › Article › peer-review

Abstract

A novel power-factor-corrected single-stage alternating current/direct current converter for inductive charging of electric vehicle batteries is introduced. The resonant converter uses the current-source characteristic of the series-parallel topology to provide power-factor correction over a wide output power range from zero to full load. Some design guidelines for this converter are outlined. An approximate small-signal model of the converter is also presented. Experimental results verify the operation of the new converter.

Original language	English
Pages (from-to)	1217-1226
Number of pages	10
Journal	IEEE Transactions on Industrial Electronics
Volume	54
Issue number	2
DOIs	https://doi.org/10.1109/TIE.2007.892996
Publication status	Published - Apr 2007

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

AC/DC power conversion
Battery chargers
Frequency control
Resonant power conversion

Access to Document

10.1109/TIE.2007.892996

Cite this

@article{d8810ef289ab4cac8150368ea74527bd,

title = "Power-factor-corrected single-stage inductive charger for electric vehicle batteries",

abstract = "A novel power-factor-corrected single-stage alternating current/direct current converter for inductive charging of electric vehicle batteries is introduced. The resonant converter uses the current-source characteristic of the series-parallel topology to provide power-factor correction over a wide output power range from zero to full load. Some design guidelines for this converter are outlined. An approximate small-signal model of the converter is also presented. Experimental results verify the operation of the new converter.",

keywords = "AC/DC power conversion, Battery chargers, Frequency control, Resonant power conversion",

author = "Egan, \{Michael G.\} and O'Sullivan, \{Dara L.\} and Hayes, \{John G.\} and Willers, \{Michael J.\} and Henze, \{Christopher P.\}",

year = "2007",

month = apr,

doi = "10.1109/TIE.2007.892996",

language = "English",

volume = "54",

pages = "1217--1226",

journal = "IEEE Transactions on Industrial Electronics",

issn = "0278-0046",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2",

}

TY - JOUR

T1 - Power-factor-corrected single-stage inductive charger for electric vehicle batteries

AU - Egan, Michael G.

AU - O'Sullivan, Dara L.

AU - Hayes, John G.

AU - Willers, Michael J.

AU - Henze, Christopher P.

PY - 2007/4

Y1 - 2007/4

N2 - A novel power-factor-corrected single-stage alternating current/direct current converter for inductive charging of electric vehicle batteries is introduced. The resonant converter uses the current-source characteristic of the series-parallel topology to provide power-factor correction over a wide output power range from zero to full load. Some design guidelines for this converter are outlined. An approximate small-signal model of the converter is also presented. Experimental results verify the operation of the new converter.

AB - A novel power-factor-corrected single-stage alternating current/direct current converter for inductive charging of electric vehicle batteries is introduced. The resonant converter uses the current-source characteristic of the series-parallel topology to provide power-factor correction over a wide output power range from zero to full load. Some design guidelines for this converter are outlined. An approximate small-signal model of the converter is also presented. Experimental results verify the operation of the new converter.

KW - AC/DC power conversion

KW - Battery chargers

KW - Frequency control

KW - Resonant power conversion

UR - https://www.scopus.com/pages/publications/34247178044

U2 - 10.1109/TIE.2007.892996

DO - 10.1109/TIE.2007.892996

M3 - Article

AN - SCOPUS:34247178044

SN - 0278-0046

VL - 54

SP - 1217

EP - 1226

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

IS - 2

ER -

Power-factor-corrected single-stage inductive charger for electric vehicle batteries

Abstract

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this