Skin Effect Suppressed Ni-Fe/Cu Electroplated Multilayer Wiring for High Data-Rate and Low Delay-Time I/O Interface Board

Masahiro Yamaguchi; Takeshi Yanai; Hidetoshi Nakayama; Ranajit Sai; Hiroaki Fujiwara; Yuki Kitai; Mikio Sato; Ushio Sangawa

doi:10.1109/TMAG.2018.2866126

Skin Effect Suppressed Ni-Fe/Cu Electroplated Multilayer Wiring for High Data-Rate and Low Delay-Time I/O Interface Board

Masahiro Yamaguchi
, Takeshi Yanai
, Hidetoshi Nakayama
, Ranajit Sai
, Hiroaki Fujiwara
, Yuki Kitai
, Mikio Sato
, Ushio Sangawa

Tohoku University
Nagasaki University
National Institute of Technology, Nagano College
Indian Institute of Science Bangalore
Panasonic Holdings Corporation

Research output: Contribution to journal › Article › peer-review

Abstract

Application of negative permeability beyond ferromagnetic resonance frequency is discussed in this paper. Targeted application is the skin effect suppression technology for long wiring on high-speed and low-delay I/O board. An 11.9 μ m-thick Ni-Fe/Cu multilayer consisting of 0.25 μ m-thick Ni-Fe and 0.51 μ m-thick Cu in turn was electroplated, patterned into 609 μ m-wide and 40 mm-long signal line of microstrip line (MSL) on a 250 μ m-thick printed circuit board. Targeted frequency was 15 GHz, where relative real part permeability was supposed to be-2. The 40 mm-long Ni-Fe/Cu multilayer exhibited the insertion as small as 0.7 dB up to 25 GHz, which is almost the same as the copper monolayer MSL of the same geometry.

Original language	English
Article number	8458383
Journal	IEEE Transactions on Magnetics
Volume	54
Issue number	11
DOIs	https://doi.org/10.1109/TMAG.2018.2866126
Publication status	Published - Nov 2018
Externally published	Yes

Keywords

Electroplated multilayer
I/O interface board
Ni-Fe
skin effect suppression

Access to Document

10.1109/TMAG.2018.2866126

Cite this

@article{20a02bb03f7146fbb18868a0025ba1eb,

title = "Skin Effect Suppressed Ni-Fe/Cu Electroplated Multilayer Wiring for High Data-Rate and Low Delay-Time I/O Interface Board",

abstract = "Application of negative permeability beyond ferromagnetic resonance frequency is discussed in this paper. Targeted application is the skin effect suppression technology for long wiring on high-speed and low-delay I/O board. An 11.9 μ m-thick Ni-Fe/Cu multilayer consisting of 0.25 μ m-thick Ni-Fe and 0.51 μ m-thick Cu in turn was electroplated, patterned into 609 μ m-wide and 40 mm-long signal line of microstrip line (MSL) on a 250 μ m-thick printed circuit board. Targeted frequency was 15 GHz, where relative real part permeability was supposed to be-2. The 40 mm-long Ni-Fe/Cu multilayer exhibited the insertion as small as 0.7 dB up to 25 GHz, which is almost the same as the copper monolayer MSL of the same geometry.",

keywords = "Electroplated multilayer, I/O interface board, Ni-Fe, skin effect suppression",

author = "Masahiro Yamaguchi and Takeshi Yanai and Hidetoshi Nakayama and Ranajit Sai and Hiroaki Fujiwara and Yuki Kitai and Mikio Sato and Ushio Sangawa",

note = "Publisher Copyright: {\textcopyright} 1965-2012 IEEE.",

year = "2018",

month = nov,

doi = "10.1109/TMAG.2018.2866126",

language = "English",

volume = "54",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "11",

}

TY - JOUR

T1 - Skin Effect Suppressed Ni-Fe/Cu Electroplated Multilayer Wiring for High Data-Rate and Low Delay-Time I/O Interface Board

AU - Yamaguchi, Masahiro

AU - Yanai, Takeshi

AU - Nakayama, Hidetoshi

AU - Sai, Ranajit

AU - Fujiwara, Hiroaki

AU - Kitai, Yuki

AU - Sato, Mikio

AU - Sangawa, Ushio

PY - 2018/11

Y1 - 2018/11

N2 - Application of negative permeability beyond ferromagnetic resonance frequency is discussed in this paper. Targeted application is the skin effect suppression technology for long wiring on high-speed and low-delay I/O board. An 11.9 μ m-thick Ni-Fe/Cu multilayer consisting of 0.25 μ m-thick Ni-Fe and 0.51 μ m-thick Cu in turn was electroplated, patterned into 609 μ m-wide and 40 mm-long signal line of microstrip line (MSL) on a 250 μ m-thick printed circuit board. Targeted frequency was 15 GHz, where relative real part permeability was supposed to be-2. The 40 mm-long Ni-Fe/Cu multilayer exhibited the insertion as small as 0.7 dB up to 25 GHz, which is almost the same as the copper monolayer MSL of the same geometry.

AB - Application of negative permeability beyond ferromagnetic resonance frequency is discussed in this paper. Targeted application is the skin effect suppression technology for long wiring on high-speed and low-delay I/O board. An 11.9 μ m-thick Ni-Fe/Cu multilayer consisting of 0.25 μ m-thick Ni-Fe and 0.51 μ m-thick Cu in turn was electroplated, patterned into 609 μ m-wide and 40 mm-long signal line of microstrip line (MSL) on a 250 μ m-thick printed circuit board. Targeted frequency was 15 GHz, where relative real part permeability was supposed to be-2. The 40 mm-long Ni-Fe/Cu multilayer exhibited the insertion as small as 0.7 dB up to 25 GHz, which is almost the same as the copper monolayer MSL of the same geometry.

KW - Electroplated multilayer

KW - I/O interface board

KW - Ni-Fe

KW - skin effect suppression

UR - https://www.scopus.com/pages/publications/85053161949

U2 - 10.1109/TMAG.2018.2866126

DO - 10.1109/TMAG.2018.2866126

M3 - Article

AN - SCOPUS:85053161949

SN - 0018-9464

VL - 54

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 11

M1 - 8458383

ER -

Skin Effect Suppressed Ni-Fe/Cu Electroplated Multilayer Wiring for High Data-Rate and Low Delay-Time I/O Interface Board

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this